Kel-Tec P-3AT
GunCritic Score

82%
Critic Rating
9 Reviews

86%
User Rating
43 Reviews
MSRP:$299.33
Used Price:
$225.89+16.08%
Sale Price:
$250.99+-17.65%
Ballistic Stats
Average Fps
980 fps
Average Energy
203 ft-lbf
Ballistic Coefficient
0.13
Sectional Density
0.11 lb/in²
Average Gr
95 gr
Pwdr Chrg Wght
3 gr
Range
25 yd
Muzzle Velocity
955 fps
Muzzle Energy
261 J
Bullet Drop
0.1 in
The P-3AT has five main component groups: barrel, slide, firing mechanism, grip, and magazine. The barrel is made of SAE 4140 ordnance steel, heat treated to 48 HRC. The slide is also 4140 steel, and contains the firing pin and the extractor. The rectangular frame is machined from solid 7075-T6 aluminum and houses the firing mechanism. The trigger connects via a transfer bar to the hammer. The hammer is driven by a novel free floating extension spring. The light weight firing pin
...
transmits the energy of the hammer to ignite the primer. After firing, the hammer block holds the hammer away from the firing pin, providing a mechanical safety.Kel-Tec P-3AT For Sale
Technical Data
Action
Double Action Only
Caliber
.380 ACP
Capacity
6+1
Finish
Black
Sights
Fixed
Barrel Length
2.75"
Weight
11 oz
Length
5.2 Inches
Height
3.5"
Width
0.9 Inches
Kel-Tec P-3At Capacity
The P3-AT is chambered in .380 ACP (get it? 3-AT / .380?) and feeds from a single-stack 6 round magazine. Even though this pistol has a locked breech, it is not rated for +P loads. Aftermarket magazine manufacturers offer copies of the 6-round flush-fit magazine as well as 8 and 10 round magazines that stick out below the bottom of the grip.
Kel-Tec P-3At Feature
The Kel-Tec P3-AT is a polymer-framed sub-compact semi-automatic pistol that operates on a Browning-style short-recoil action with a tilting barrel and fires from a double-action trigger pull. It is built with a stainless-steel slide that contains a 2.7 inch barrel that is paired with non-adjustable iron sights that are machined directly into the slide. These sights are incredibly low-profile as this gun was designed to be used at incredibly close ranges.
Kel-Tec P-3At Ergonomics
The P3-AT has a short, 2-finger grip that is molded with grooves along the front and back and checkering on the left and right sides. Its magazine release sits behind the trigger guard along the grip like most pistols, however there is no external safety. The slide includes grip serrations to aid the user in manually cycling the action against the rather heavy recoil spring, and the trigger has a long and heavy pull due to the gun’s small double-action hammer.
Kel-Tec P-3At Concealability
The P3-AT measures approximately 5.2 inches long, 3.5 inches tall and measures less than 1 inch wide allowing it to easily be concealed just about anywhere. Whether it’s in an ankle holster, tossed in a pocket, carried in a handbag or tucked inside your belt, this gun can be easily concealed in almost any choice of attire. Just make sure you have a decent holster.
Kel-Tec P-3At Fit-N-Finish
The P3-AT is made with a polymer frame allowing it to be made in a seemingly limitless number of possible colors. The slides are black-nitride coated for models with black slides while the colored slides are typically Cerakoted. This pistol’s surface finishes and easy detail-cleaning disassembly allow for easy customization by qualified gunsmiths
GunCritic Score
MSRP:
$299.33
Used Price:
$225.89 +16.08%
Sale Price:
$250.99 +-17.65%
Want to Sell Your Gun?
Kel-Tec P-3AT Specifications
Category
Action
Double Action Only
Caliber
.380 ACP
Capacity
6+1
Finish
Black
Sights
Fixed
Barrel Length
2.75"
Weight
11 oz
Length
5.2 Inches
Height
3.5"
Width
0.9 Inches
Kel-Tec P-3AT Comparisons
vs
vs
vs
vs
vs
vs
vs
vs
vs