Barrett REC7 G2

GunCritic Score

80%

Critic Rating

1 Reviews

97%

User Rating

10 Reviews

MSRP:$1999.00

Used Price:

$1599.20

Sale Price:

$1999.00

Ballistic Stats

Category

Rifles

Caliber

.223 Remington (5.56x45mm NATO)

Gun Types

Rifle

Case Types

Rimless, Bottleneck

Height

1.76

Average Fps

3200 fps

Average Grain

Average Energy

1254 ft-lbf

Recoil

5.1 N

Ballistic Coefficient

0.24

Sectional Density

0.16 lb/in²

Average Gr

55 gr

Pwdr Chrg Wght

21.5 gr

Pwdr Chrg Vel

3240 fps

Range

600 yd

Muzzle Velocity

3100 fps

Muzzle Energy

1800 J

Bullet Drop

0.01 in

Wind Drift

0.01 in

Case Material

Brass

Rim Type

Rimless

Bullet Types

Full Metal Jacket,Soft Point,Jacketed Hollow Point

Primer Type

Small Rifle

Bullet Diameter

0.349 in

Land Diameter

0.338 in

Neck Diameter

0.394 in

Base Diameter

0.467 in

Rim Diameter

0.470 in

Rim Thickness

0.053 in

Case Length

45 in

Oal Cartridge Length

57 in

Bullet Weight

62 gr

Barrett REC7 G2

Palmetto State Armory

New!

From$2030.99

See Deal

Eliminate all doubt. Compact, accurate and completely trustworthy, the REC7 is designed specifically for situations in which theres no room for error. Styled in the familiar AR configuration, its a no-nonsense rifle you can trust with anythingincluding your life. This tough-as-nails rifle was designed specifically to answer the call for a low-maintenance, enhanced reliability carbine. The REC7 rifles dependability stems largely from its innovative operating system. Using a minimum number of parts, the piston system separates heat and powder residue from the

...

bolt carrier and trigger assembly. The rifle runs cool and clean, reducing maintenance requirements and increasing endurance. The patented chrome-lined fluted gas block prevents excessive carbon buildup from operation under adverse conditions. The one-piece 17-4 stainless piston transfers energy to the anti-tilt bolt carrier. Machined from a monolithic block of 8620 steel, the carrier features an integral piston strike face. The Barrett Enhanced Bolt is made from high-strength 9310 steel. The bolt is designed specifically for use in the piston operated REC7, not just adapted from a direct gas bolt. The bolts gas-ring-free design is easy to clean. Reinforced at critical areas, every bolt is proofed and magnetic-particle inspected to guarantee reliable performance. At the heart of the operating system is a nitrided, two-position, forward-venting gas plug that retains the piston. The piston can be accessed through the front of the gas block without removing the handguard so optical sights or laser devices do not need to be zeroed after routine maintenance. The REC7 rifles forged 7075 aluminum upper and lower receivers are Type 3 hardcoat anodized. The lower houses an ultra-dependable single-stage trigger. The upper supports a free-floated, hammer-forged, chrome-lined barrel with M4 feed ramps machined into the receiver and the barrel extension. A mil-spec A2 flash hider protects the muzzle. In 5.56 NATO and 6.8 SPC, the REC7 is everything youd expect from a Barrett rifle, and then some.